Tuesday, June 24, 2014

Ohai Linux! So you are a network switch now...

Decided to see what the fuss was all about surrounding these open source switches. Plus the rocket powered turtle really did peak my interest ;-)

[ http://cumulusnetworks.com and http://onie.org/ ]

I built all of this on a CentOS release 6.5 (Final), and I wanted to build everything from source to really see how ONIE worked from the ground up. Don't try this at home kids, there is no reason to try and damage yourself.
git clone https://github.com/onie/onie.git

Needed to add some deps, this was a little painful to find what was missing, much make fail, make, fail repeat, but this should be enough for most folks to run so you don't have to go through the iterations I did - this is a monster build. I learned a lot here, never having used "realpath" for example, or any of the syslinux kit which is fab!
sudo yum install realpath
sudo yum install gperf
sudo yum install stgit
sudo yum install texinfo
sudo yum install glibc-static
sudo yum install libexpat-devel
sudo yum install python-devel
sudo yum install fakeroot
sudo yum install syslinux syslinux-devel syslinux-extlinux syslinux-perl
sudo ln -s /usr/share/syslinux /usr/lib/syslinux

Oh and get a fresh autoconf if you are on CentOS 6.5
wget http://ftp.gnu.org/gnu/autoconf/autoconf-latest.tar.gz
tar zxvf autoconf-latest.tar.gz
cd autoconf-2.69/
sudo make install

And away we go!
[jcuff@jcair-vm build-config]$ make -j4 MACHINE=kvm_x86_64 all recovery-iso

mkdir: created directory `/home/jcuff/onie/build'
mkdir: created directory `/home/jcuff/onie/build/images'
mkdir: created directory `/home/jcuff/onie/build/download'
mkdir: created directory `/home/jcuff/onie/build/kvm_x86_64-r0'
mkdir: created directory `/home/jcuff/onie/build/kvm_x86_64-r0/stamp'
mkdir: created directory `/home/jcuff/onie/build/kvm_x86_64-r0/initramfs'
==== Getting Linux ====
2014-06-11 14:50:54 URL:http://dev.cumulusnetworks.com/~curt/mirror/onie/linux-3.2.35.tar.xz [65143140/65143140] -> "/home/jcuff/onie/build/download/linux-3.2.35.tar.xz" [1]
linux-3.2.35.tar.xz: OK

wheee! (get a large beverage, this bit takes a while!
[jcuff@jcair-vm build-config]$ ls -ltra ../build/images/
total 34212
drwxrwxr-x. 7 jcuff jcuff     4096 Jun 11 17:24 ..
-rw-rw-r--. 1 jcuff jcuff  3301792 Jun 11 18:29 kvm_x86_64-r0.vmlinuz
-rw-rw-r--. 1 jcuff jcuff  5284988 Jun 13 11:23 kvm_x86_64-r0.initrd
-rw-rw-r--. 1 jcuff jcuff  8603253 Jun 13 11:23 onie-updater-x86_64-kvm_x86_64-r0
drwxrwxr-x. 2 jcuff jcuff     4096 Jun 13 11:29 .
-rw-rw-r--. 1 jcuff jcuff 17825792 Jun 13 11:30 onie-recovery-x86_64-kvm_x86_64-r0.iso

Make a disk:
[root@jcair-vm onie]# dd if=/dev/zero of=/tmp/onie-x86-demo.img bs=1M count=256
256+0 records in
256+0 records out
268435456 bytes (268 MB) copied, 0.272711 s, 984 MB/s

Spin up the kvm!
[root@jcair-vm onie]# sudo /usr/libexec/qemu-kvm -m 1024 -name onie -boot order=cd,once=d -cdrom /tmp/onie.iso -net nic,model=e1000 -vnc -vga std -drive file=/tmp/onie-x86-demo.img,media=disk,if=virtio,index=0 -serial telnet:localhost:9000,server

And you are golden!
ONIE: Starting ONIE Service Discovery
Info: Found static url: file:///lib/onie/onie-updater
ONIE: Executing installer: file:///lib/onie/onie-updater
Verifying image checksum ... OK.
Preparing image archive ... OK.
ONIE: Version       : master-201406241118-dirty
ONIE: Architecture  : x86_64
ONIE: Machine       : kvm_x86_64
ONIE: Machine Rev   : 0
ONIE: Config Version: 1
Installing ONIE on: /dev/vda
Pre installation hook
Post installation hook

Remove the CD from your config and you can now boot the live version, and if everything has worked out, the discovery process will work and you can now ping the UK from the USA...
ONIE: Rescue Mode ...
Version   : master-201406241118-dirty
Build Date: 2014-06-24T11:40-0400
Info: Mounting kernel filesystems... done.
Info: Mounting LABEL=ONIE-BOOT on /mnt/onie-boot ...
Running demonstration platform init pre_arch routines...
Running demonstration platform init post_arch routines...
Info: Using eth0 MAC address: 52:54:00:2b:63:f6
Info: eth0:  Checking link... up.
Info: Trying DHCPv4 on interface: eth0
ONIE: Using DHCPv4 addr: eth0: /
Starting: dropbear ssh daemon... done.
Starting: telnetd... done.
discover: Rescue mode detected.  Installer disabled.

Please press Enter to activate this console. 

ONIE:/ # onie-sysinfo -a
VM-1234567890 52:54:00:2b:63:f6 master-201406241118-dirty 42623 kvm_x86_64 0 x86_64-kvm_x86_64-r0 x86_64 1 gpt 2014-06-24T11:40-0400

ONIE:/ # ping www.ebi.ac.uk
PING www.ebi.ac.uk ( 56 data bytes
64 bytes from seq=0 ttl=61 time=108.473 ms
64 bytes from seq=1 ttl=61 time=103.824 ms
64 bytes from seq=2 ttl=61 time=103.238 ms
--- www.ebi.ac.uk ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 103.238/105.178/108.473 ms

p.s. for extra twisted points this is ONIE running on linux KVM, inside virtualbox, on a mac on a pair of different layer three networks... it becomes a little confusing to run commands, but always makes me chuckle that a mac laptop is basically a little data center at this point :-)
jcair:~ jcuff$ uname -v

Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64

jcair:~ jcuff$ ssh -p 2222 root@ ssh uname -a

Linux onie 3.2.35-onie+ #1 SMP Tue Jun 24 11:30:01 EDT 2014 x86_64 GNU/Linux


(c) 2018 James Cuff